TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication during the initial setup phase is transmitted in cleartext without encryption. Bluetooth is only used during initialization. An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization.  An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization. D100C is the chime delivered with your Tapo camera, and it is delivered with the following Tapo products: D130, D210, D235, D225, TD21, TDB21 and TD25

An authentication logic vulnerability in multiple TP-Link range extenders allows an unauthenticated attacker on an adjacent network to manipulate a login parameter and reset the administrator password due to insufficient validation. Successful exploitation allows an attacker to obtain full administrative control of the affected device, potentially impacting on confidentiality, integrity, and availability.

TP-Link TL-WR720N wireless router contains a cross-site request forgery vulnerability that allows attackers to perform unauthorized administrative actions by crafting malicious web requests. Attackers can modify port forwarding rules via VirtualServerRpm.htm or change WiFi security settings via WlanSecurityRpm.htm by tricking authenticated users into visiting attacker-controlled pages.

tp-link

TP-Link TL-WR841N v13 uses DES-CBC encryption in the TDDPv2 debug protocol with a cryptographic key derived from default web management credentials, making the key predictable if device is left in default configuration. A network-adjacent attacker can exploit this weakness to gain unauthorized access to the protocol, read debug data, modify certain device configuration values, and trigger device reboot, resulting in loss of integrity and a denial-of-service condition.

tp-link

Inadequate Encryption Strength vulnerability in TP-Link Archer C7 v5 and v5.8 (uhttpd modules) allows Password Recovery Exploitation. The web interface encrypts the admin password client-side using RSA-1024 before sending it to the router during login.  An adjacent attacker with the ability to intercept network traffic could potentially perform a brute-force or factorization attack against the 1024-bit RSA key to recover the plaintext administrator password, leading to unauthorized access and compromise of the device configuration.  This issue affects Archer C7: through Build 20220715.

tp-link

An OS command injection vulnerability in the dnsmasq module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to execute arbitrary code when a specially crafted configuration file is processed due to insufficient input validation. Successful exploitation may allow the attacker to modify device configuration, access sensitive information, or further compromise system integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213.

tp-link

An external configuration control vulnerability in the OpenVPN module of TP-Link AX53 v1.0 allows an authenticated adjacent attacker to read arbitrary files when a malicious configuration file is processed. Successful exploitation may allow unauthorized access to arbitrary files on the device, potentially exposing sensitive information.This issue affects AX53 v1.0: before 1.7.1 Build 20260213.

tp-link

An external control of configuration vulnerability in the OpenVPN module of TP-Link AX53 v1.0 allows an authenticated adjacent attacker to read arbitrary file when a malicious configuration file is processed.  Successful exploitation may allow unauthorized access to arbitrary files on the device, potentially exposing sensitive information.This issue affects AX53 v1.0: before 1.7.1 Build 20260213.

tp-link

An OS command injection vulnerability in the OpenVPN module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to execute system commands when a specially crafted configuration file is processed due to insufficient input validation. Successful exploitation may allow modification of configuration files, disclosure of sensitive information, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213.

tp-link

A stack-based buffer overflow in the tmpServer module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to trigger a segmentation fault and potentially execute arbitrary code via a specially crafted configuration file. Successful exploitation may cause a crash and could allow arbitrary code execution, enabling modification of device state, exposure of sensitive data, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213.

tp-link

A denial-of-service vulnerability was identified in TP-Link Tapo C520WS v2.6 within the HTTP request path parsing logic. The implementation enforces length restrictions on the raw request path but does not account for path expansion performed during normalization. An attacker on the adjacent network may send a crafted HTTP request to cause buffer overflow and memory corruption, leading to system interruption or device reboot.

tp-link

A stack-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within a configuration handling component due to insufficient input validation. An attacker can exploit this vulnerability by supplying an excessively long value for a vulnerable configuration parameter, resulting in a stack overflow. Successful exploitation results in Denial-of-Service (DoS) condition, leading to a service crash or device reboot, impacting availability.

tp-link

An authentication bypass vulnerability within the HTTP handling of the DS configuration service in TP-Link Tapo C520WS v2.6 was identified, due to inconsistent parsing and authorization logic in JSON requests during authentication check. An unauthenticated attacker can append an authentication-exempt action to a request containing privileged DS do actions, bypassing authorization checks. Successful exploitation allows unauthenticated execution of restricted configuration actions, which may result in unauthorized modification of device state.

tp-link

A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within the asynchronous parsing of local video stream content due to insufficient alignment and validation of buffer boundaries when processing streaming inputs.An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries.  Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.

tp-link

A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within the HTTP parsing loop when appending segmented request bodies without continuous write‑boundary verification, due to insufficient boundary validation when handling externally supplied HTTP input.  An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries.  Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.

tp-link

A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 in the HTTP POST body parsing logic due to missing validation of remaining buffer capacity after dynamic allocation, due to insufficient boundary validation when handling externally supplied HTTP input.  An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries.  Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.

tp-link

A Denial-of-Service (DoS) vulnerability in the httpd component of TP-Link's TD-W8961N v4.0 due to improper input sanitization, allows crafted requests to trigger a processing error that causes the httpd service to crash. Successful exploitation may allow the attacker to cause service interruption, resulting in a DoS condition.

tp-link

A hardcoded cryptographic key within the configuration mechanism on TP-Link Archer NX200, NX210, NX500 and NX600 enables decryption and re-encryption of device configuration data. An authenticated attacker may decrypt configuration files, modify them, and re-encrypt them, affecting the confidentiality and integrity of device configuration data.

tp-link

Improper input handling in a modem-management administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

tp-link

Improper input handling in a wireless-control administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

tp-link

A missing authentication check in the HTTP server on TP-Link Archer NX200, NX210, NX500 and NX600 to certain cgi endpoints allows unauthenticated access intended for authenticated users. An attacker may perform privileged HTTP actions without authentication, including firmware upload and configuration operations.

tp-link